Guides

One guide per game: what it shows, the one idea behind it, and how to play. The chemistry itself — valence, bonds, functional groups, how to read a name — lives in the Lessons.

⚛ The engine 🔧 Fix 🧩 Build 🧲 Dimer Duel 🎵 Sounds 💥 Crash Test 🌀 Torsions 🗺️ PES 💧 Solvate Torsion tutorials PES tutorials Solvate tutorials 🎓 Lessons →
🎓
Looking for the chemistry? Which atoms take how many bonds, what a double bond is, how to spot an ester or read “3-methylbutan-2-ol” — those are now Lessons, each in a simple and an in-depth version with an interactive widget. Inside Fix and Build, the target card links you to exactly the lessons the current molecule needs.

⚛ The engine behind every game

one force field, one rule: atoms slide downhill

A force field computes two things for any arrangement of atoms: the potential energy (how happy the molecule is) and the force on every atom (which way it is being pushed). This platform uses SO3LR, a machine-learned force field — a neural network trained on quantum-chemistry data that predicts energies and forces in milliseconds, so the molecules on screen respond in real time.

Atoms feel forces and move downhill toward lower energy. A structure is relaxed (optimized) when no atom feels a net push — it sits at the bottom of an energy valley. Grab an atom and pull: you climb the valley wall; let go and the whole structure slides back down. The readout is the maximum force (eV/Å): big means far from settled, small means converged.

force on an atom = −(slope of the energy at that atom)  ·  relaxed ⇔ all forces ≈ 0
Every wiggle, snap-back and relaxation you see is the same neural-network force field researchers use for molecular simulation — not a scripted animation.

🔧 Fix the Structure

game · single player · a repair puzzle

The idea

The correct molecule is relaxed, then one to three extra atoms are bonded into it — tacked on the outside or wedged into a bond — and it is relaxed again, so it looks settled but is wrong. Nothing is missing and nothing is retyped: the whole puzzle is finding the atoms that do not belong and dragging them clear. The instant the real molecule exists as its own connected piece, you win; the strays are cleared away and the clean result relaxes on screen.

  1. Read the target card: name, formula and functional groups of the real molecule. The Atoms counter minus the formula's total is the number of intruders.
  2. Scan for an atom with too many neighbours (an oxygen holding three, a carbon holding five) or a bare atom with no hydrogens where the name says there should be some.
  3. Drag the intruder right out. Nothing is deleted — you can always drag an atom back, so mistakes are free.
  4. If the force field keeps pulling it back, switch your pointer to Free, move it, and switch back to Physics to relax and check. Fragment carries a whole loose piece as one set — that is how you dock a piece that came off back onto the rest.
  5. Stuck? Pulse the next intruder makes the atom to remove flash three times, and moves on to the next one only once that one is clear. Give up ends it as a draw and shows the real molecule in 3-D. The Lessons for this molecule panel links the chemistry you need for this exact target.

🧩 Build a Molecule

game · single player · an assembly puzzle

The idea

You get exactly the right atoms as a loose cloud, plus the target's name and its 2-D drawing. Bring two atoms within bonding distance — about 1.3 × the sum of their covalent radii — and the force field forms a real bond and relaxes everything around it. You never draw a double bond: two neighbouring atoms each left one partner short simply relax into one. The win test compares the bond graph (which element is joined to which), so any correct assembly counts, in any orientation.

  1. Decode the name or read the drawing: chain length, ring or not, main group, substituents.
  2. Skeleton first — the carbons in a zig-zag, or the ring closed flat.
  3. Heteroatoms next — O, N, S on their numbered carbons.
  4. Hydrogens and halogens last — they are end caps and would block sites the skeleton still needs.
  5. Wrong bond? Pull the atom away and try again. For big targets, lay everything out with the Optimizer off, then switch it on to relax all at once.

🧲 Binding Dimer Duel

game · two players · a binding-energy contest

The idea: binding energy

Two molecules near each other can attract — through hydrogen bonds, electrostatics, or gentle van-der-Waals stickiness. Binding energy measures how strongly they hold together. Each molecule is relaxed alone (EA, EB); then the pair is relaxed together from your pose (Edimer):

Ebind = (EA + EB) − Edimer

Positive means the pair is more stable together than apart; bigger is stronger. A clumsy pose (atoms clashing, or too far to feel each other) drifts apart and scores near zero. The skill is lining up the sticky parts — an –OH pointing at an =O, say.

  1. Two relaxed molecules load. The blue one is fixed; the orange one is yours to move.
  2. Rotate it: Shift-drag, the arrow keys (Q/E roll, W/S in/out), or the sliders. Drag its atoms to slide it.
  3. Watch the live readout — the instant interaction energy of your pose, a "warmer / colder".
  4. Press Lock in to relax the pair and record the real binding energy.
  5. Switch players and beat it. Highest binding energy wins; ties are broken by how similar the two relaxed dimers are.

🎵 Sounds of Nature

game · single player · spectra, music and motion

The idea: a spectrum you can hear

A molecule is never still — its bonds behave like springs, so it is always vibrating. Any jiggle is a combination of a fixed set of simple coordinated motions, the normal modes: a molecule of N atoms has 3N − 6 of them (3N − 5 if linear), each oscillating at its own frequency. Stiff springs between light atoms ring high (an O–H stretch), floppy skeleton bends ring low. Chemists measure the frequency in wavenumbers (cm⁻¹):

~500 skeletal bends · ~1000–1500 fingerprint · ~1700 C=O · ~2200 C≡C/C≡N · ~3000 C–H · ~3600 O–H/N–H

A mode absorbs infrared light only if it changes the molecule's dipole — that is the IR intensity, the height of each bar in the equaliser. CO₂'s symmetric stretch keeps the molecule balanced, so its middle bar is flat on the floor. Molecular vibrations are a billion times too fast to hear, so the game stretches the whole spectrum down into the audible range (≈130 Hz–2 kHz); a note rings the vibration nearest its mapped wavenumber, and the atoms move as the real combination of the excited modes.

  1. Pick a molecule — a curated instrument, 🎲 Random, or by class or name. Its spectrum appears as an equaliser.
  2. Play a track in YouTube's own player (a popular hit or any link you paste). The molecule hears it through your microphone, which switches on with the video — so play it out loud, and raise Sensitivity if it stays cold. 🎤 Listen alone works with any sound in the room.
  3. Watch the molecule move as the excited normal modes add together; the bars bounce with each mode's activation.
  4. Pause and click any bar to see and hear one vibration on its own.
  5. Drag the line over the spectrum — it is an amplitude multiplier per band. Dynamic (the default) lifts the fast, stiff stretches ∝ (ν/span)² up to ×7, which is what makes the molecule snap with the music; Flat is the honest physics.

💥 Crash Test

single player · molecular collisions

The idea: chemistry is collisions

Molecules react because they bump into each other. Whether a collision does anything depends on how hard it is: in the frame that moves with the pair, the energy available is the collision energy ½ μ vrel², with μ the reduced mass and vrel the closing speed. A gentle bump just makes the two molecules bounce, spinning and vibrating a little; with more energy than a bond is worth (a C–H bond is about 4.5 eV) the collision can break bonds and make new ones.

Ecoll = ½ μ vrel²  ·  μ = mAmB/(mA+mB)  ·  vrel = vA + vB

Both molecules are first relaxed with the force field, turned to a random orientation and parked 20 Å apart. Each gets a speed towards the other, given to every one of its atoms as the same velocity — no spin, no heat. From then on nothing is scripted: SO3LR supplies the forces and the atoms obey Newton's laws (constant total energy, no thermostat), so every vibration, broken bond or new molecule you see was caused by the crash itself.

  1. Pick molecule A and B — search the catalog, type a name or SMILES, or roll 🎲. 🔄 Re-orient tries a new random approach.
  2. Set each molecule's initial speed with its slider (km/s — room-temperature molecules move at about 0.5 km/s); the panel shows its kinetic energy and the pair's collision energy. 🔗 Same speed keeps the two sliders together.
  3. 💥 Launch. The camera follows the pair, zooms to keep both on screen and slows down around the impact; afterwards it lets the pieces fly apart and tells you what came out.
  4. Scrub the timeline or ⟲ replay — the whole trajectory is kept. Drag the view to take the camera yourself.

🌀 Torsion Explorer

tool · conformers and rotation barriers

The idea: a bond that spins

Most single bonds can rotate, like two hands sharing an axle. The molecule keeps the same bonds and changes shape; each twisted shape is a conformer, and the twist is measured by a dihedral angle defined by four atoms in a row, i–j–k–l: the middle bond j–k turns, and the angle is how far i–j is twisted from k–l when you look straight down j–k. That head-on view is the Newman projection.

As the bond turns the energy rises and falls. The valleys are stable staggered shapes; the peaks are eclipsed shapes where groups bump; the climb between them is the rotation barrier.

rotation barrier = E(highest, eclipsed) − E(lowest, staggered)  ·  usually a few kJ/mol
Relaxed scan
hold the dihedral at each angle and let everything else relax — the real, physical profile.
Rigid scan
just twist the frozen geometry — higher, spikier barriers that show the raw steric clash.
  1. Choose a molecule — type a name or SMILES, tap a quick pick, or search the catalog.
  2. Click four atoms in order (i–j–k–l); the bond between the middle two will spin.
  3. Choose Relaxed or Rigid and a step, then Run scan.
  4. Watch the energy-vs-angle curve fill in with the Newman projection turning alongside.
  5. Read off the barrier and the conformers; hover the curve to fly through the shapes; keep a scan and load another to compare.

🗺️ PES Explorer

tool · 1-, 2- and 3-D potential-energy surfaces

The idea: the energy landscape

A torsion scan is one knob. A potential-energy surface (PES) is the whole dashboard: the energy mapped over one, two or three coordinates — any bond length, bond angle or dihedral — at once. Valleys are the shapes the molecule likes; the curvature of a valley floor is a bond's stiffness (and sets the pitch you hear in Sounds of Nature); a pass between two valleys is a transition state, and its height above the valley is a reaction barrier.

Each grid point is either a single-point energy on the twisted geometry (rigid) or a full relaxation with the scanned coordinates held fixed (relaxed). The surface is drawn live: a curve, a rotatable coloured landscape, or a point cloud.

  1. Load a molecule, then click atoms to define 1–3 coordinates (2 atoms = bond, 3 = angle, 4 = dihedral) with a range and step count.
  2. Choose Rigid or Relaxed and start the scan; 2-D maps take a few minutes to fill.
  3. Hover the surface to fly the molecule to that geometry; click to pin a mini structure there.
  4. Roll downhill from any node to the nearest minimum, or Trace reaction path between the two deepest basins to see reactant → transition state → product and read the barrier.

💧 Solvate

tool · solvation shells & the solute ⇄ solvent interaction energy

The idea: "like dissolves like", measured

Nothing in a flask is ever alone. A dissolved molecule — the solute — sits inside a cage of solvent that it pulls on and that pulls back, and whether it dissolves at all is that tug-of-war. Here the cage is built for real: solvent molecules are seated on Fibonacci spheres (points spread evenly over a sphere by the golden-angle spiral) at growing radii, polar ones turned so their electronegative head points inward, and after every shell the whole cluster is SO3LR-relaxed live — so you watch the first hydration shell collapse onto the solute instead of being told about it.

The number that matters is the interaction energy Eint = E(solute) + E(solvent shell) − E(system), measured at the packed geometry. Because both pieces are priced in the shape they ended up in, the solvent's own cohesion cancels out and what is left is purely how hard this solvent holds this solute. A polar guest scores high in water and low in methane; a greasy one does the opposite — that is "like dissolves like" as a number.

  1. Pick a solute — a catalog molecule, a name, or a SMILES string.
  2. Pick a solvent: water and methanol are polar, methane is not. Choose how many shells to pack.
  3. Press Solvate and watch each shell drop in and settle. Leave the solute held fixed, or release it to let the solvent reshape it.
  4. Run the same solute in all three solvents and read the scoreboard: the one with the largest Eint is the one it dissolves in.

🔄 Torsion tutorials

worked examples that run the Explorer for you

Each picks a famous case, runs it live in the Torsion Explorer, and checks the result against a textbook or the original research. Press Open in Torsion Explorer and watch the curve build.

🗺️ PES tutorials

from a single bowl to a reaction caught in motion

Runnable in the PES Explorer and checked against the literature. The two-dimensional maps take a few minutes to fill.

💧 Solvate tutorials

watch "like dissolves like" happen, shell by shell

Drop a molecule in solvent and pack it on Fibonacci spheres in the Solvate tool, letting each shell relax before the next. From a single hydration shell to a solvation-energy scoreboard — press Open in Solvate and watch the solvent settle.